The phrase identifies the technical specifications for a specific model of Husqvarna lawn tractor, the TC 114. It signifies a collection of detailed measurements, capacities, materials, performance metrics, and operational characteristics associated with that particular machine. For example, these specifications might include engine displacement, cutting width, fuel tank volume, and overall weight.
Accessing this information is crucial for potential buyers, current owners, and service technicians. It allows for informed purchasing decisions, proper maintenance and repair procedures, and accurate performance comparisons with competing models. Understanding the capabilities and limitations defined therein ensures efficient operation and prolongs the machine’s lifespan. Historically, manufacturers have provided such data to standardize communication and ensure compatibility of parts and accessories.
The subsequent sections will elaborate on various aspects relating to these specifications, including engine details, cutting deck parameters, drive system features, and dimensional measurements. This detailed exploration aims to offer a complete overview of the machine’s inherent properties and operational capabilities.
1. Engine Performance
Engine performance, a critical component of the Husqvarna TC 114 technical specifications, directly influences the machine’s mowing capability and overall efficiency. The engine’s power output, measured in horsepower (hp) and torque (Nm), dictates its ability to cut through varying grass thicknesses and navigate inclines. A higher horsepower rating generally correlates with improved performance under heavier mowing conditions, while torque characteristics influence responsiveness and the ability to maintain blade speed when encountering resistance. Therefore, these specific engine parameters, as detailed in the data sheet, are primary indicators of the tractor’s operational capacity.
For example, a TC 114 with a specified engine output of 10 hp and 25 Nm of torque is expected to perform adequately on relatively flat lawns with regularly maintained grass. However, if the technical specifications indicate a lower torque rating, such as 20 Nm, the operator might experience reduced performance when mowing thick, damp grass or navigating slopes. These specifications also provide insight into fuel consumption rates, impacting the overall cost of operation. Discrepancies between advertised engine performance and actual capabilities, often revealed through careful examination of the technical data, can inform consumer decisions and influence brand perception.
In summary, engine performance data within the Husqvarna TC 114 technical specifications serves as a fundamental benchmark for assessing the tractor’s suitability for specific applications. A thorough understanding of these parameters allows for optimized utilization, informed maintenance practices, and realistic performance expectations. The engine data, therefore, remains an indispensable aspect of the overall technical profile.
2. Cutting Deck Dimensions
The cutting deck dimensions constitute a significant portion of the overall technical specifications for the Husqvarna TC 114. These measurements, encompassing the cutting width, blade configuration, and deck material, directly influence the machine’s mowing efficiency and effectiveness. A wider cutting width, typically expressed in inches or centimeters, enables the operator to cover more ground in a single pass, reducing the overall mowing time. Blade configuration dictates the cutting pattern and the quality of the cut, while deck material influences durability and resistance to corrosion. Understanding these dimensions within the comprehensive data informs purchasing decisions and maintenance strategies. For example, knowing the precise blade length facilitates accurate replacement and ensures optimal cutting performance. Deviations from the specified dimensions can compromise the machine’s effectiveness and potentially lead to damage.
Furthermore, the cutting deck’s physical parameters interact with other elements described in the “Husqvarna tc 114 dane techniczne”. The engine’s power output, for instance, must be sufficient to drive the blades efficiently across the specified cutting width. A mismatch between engine power and deck size can result in reduced cutting performance, particularly in dense or wet grass. Similarly, the deck’s height adjustment range, another key specification, determines the versatility of the machine for various lawn types and conditions. A wider height adjustment range allows the operator to adapt to different grass lengths and achieve the desired cutting height. The deck material and construction, as outlined in the specifications, also contribute to the deck’s durability and resistance to wear and tear, impacting the machine’s long-term reliability.
In conclusion, the cutting deck dimensions represent a crucial set of parameters within the “Husqvarna tc 114 dane techniczne”. These specifications directly correlate with the mower’s performance, efficiency, and suitability for specific applications. A thorough understanding of these dimensions, in conjunction with other technical details, enables informed decision-making, effective maintenance, and optimal utilization of the Husqvarna TC 114. Any modifications or deviations from the stated cutting deck specifications could negatively impact the mower’s intended performance and longevity.
3. Drive System Specifications
Drive system specifications, as delineated within the “Husqvarna tc 114 dane techniczne,” define the operational parameters of the lawn tractor’s propulsion mechanism. These specifications govern the machine’s ability to traverse various terrains and maintain consistent speed under different load conditions. The type of transmission, be it hydrostatic or gear-driven, directly impacts ease of operation and maneuverability. Hydrostatic transmissions typically offer smoother speed adjustments and enhanced control, while gear-driven systems may provide greater torque for demanding applications. Understanding the drive system’s attributes is crucial for assessing the tractor’s suitability for specific lawn care tasks. For instance, a hydrostatic transmission is advantageous for navigating complex landscapes with frequent directional changes, while a gear-driven system may be preferable for mowing large, open areas with minimal obstacles.
The gear ratios, wheel dimensions, and differential mechanisms detailed in the drive system specifications contribute significantly to the tractor’s traction and stability. Higher gear ratios provide increased torque for climbing inclines or towing attachments, while larger wheel diameters enhance ground clearance and improve the machine’s ability to overcome obstacles. Differential locks, often included in the specifications, distribute power evenly to both rear wheels, preventing slippage on uneven or slippery surfaces. A discrepancy between the specified drive system capabilities and the actual operational demands can lead to reduced performance, premature wear, or even system failure. Therefore, meticulous review of the “Husqvarna tc 114 dane techniczne” drive system section is essential for ensuring compatibility between the machine’s capabilities and the intended application.
In summary, the drive system specifications form an integral part of the comprehensive “Husqvarna tc 114 dane techniczne” document. These details dictate the machine’s mobility, traction, and overall operational efficiency. Thorough understanding of these parameters enables informed purchasing decisions, appropriate maintenance practices, and optimal utilization of the Husqvarna TC 114 lawn tractor. Failure to consider the drive system specifications can result in diminished performance, increased operating costs, and a shortened lifespan for the equipment.
Conclusion
The comprehensive exploration of “Husqvarna tc 114 dane techniczne” reveals the critical importance of understanding these specifications. This data provides a framework for evaluating the machine’s capabilities, ensuring proper maintenance, and optimizing performance. Engine performance, cutting deck dimensions, and drive system specifications collectively define the operational parameters of the TC 114. A thorough understanding of these elements facilitates informed decision-making and promotes efficient utilization of the lawn tractor.
Ultimately, consulting the “Husqvarna tc 114 dane techniczne” remains essential for maximizing the lifespan and effectiveness of the machine. Continued adherence to specified maintenance protocols and operating parameters will contribute to sustained performance and long-term value. The technical specifications serve as a vital resource for owners and service professionals alike.
